FUJI RL XPR7
FUJI RL XPR7S
Plotter Film HG XPR-7S is one of the films in FUJIFILM's Satisfine PCB film series. Systems. It is designed for laser photoplotters equipped with He-Ne lasers or red laser diodes. Incorporating FUJIFILM proprietary charged accelerator emulsion technology best results are obtained when processed with the HQ Systems developers.
SAFELIGHT: Use a Fuji Safelight Glass SLG-No. 4B (green) with a 10 watt lamp. Handle the film at a distance of at least one meter away from the safelight.
Features
- HG XPR-7S has sensitivity and contrast suitable for laser photoplotters equipped with He-Ne lasers or red laser diodes High quality images with sharp edges are provided .
- HG XPR-7S is suitable for processing in FUJI HQ System developer, which provides high quality and consistent results.
- To eliminate false signals with AOI (automated optical inspection), the emulsion contains just the minimum amount of matte required.
- The film backing layer contains an electro-conductive grain developed by FUJIFILM that provides permanent protection from charging.
- HG XPR-7S has wide development latitude, enabling consistent processing results regardless of fluctuations in the condition of the processing chemicals.
- HG XPR-7S absorbs less ultraviolet light, allowing the reduction of the exposure time onto the photoresist.
BASE: 0.175 mm polyester base
SPECTRAL SENSITIVITY: Red-sensitiveSAFELIGHT: Use a Fuji Safelight Glass SLG-No. 4B (green) with a 10 watt lamp. Handle the film at a distance of at least one meter away from the safelight.